10,000 GPD Commercial RO System: Inside the Custom Pre-Plumbed Skid

So, we recently finished a pre-plumb system. Let's go check it out. This system was put on a custom-fabricated frame. Um it has our dosing storage tank. It's going to have an anti-silicous solution in it.

It has a brine tank for the water softener. And right there on the end, it also has a metal removal filter. This is our pre-plumb skid. So, all you'll have to do when you get it is plug in your inlet, your outlet, and your drain line. So, around on the back, you can see our water inlet.

This is where our dosing system is going to tee into. We have a vacuum breaker that'll release any air that gets caught in the system. And then we're going to go directly into our softener. Then out of our softener into our metal removal. And then out of our metal removal into our RO.

We have a 10,000 gallon a day reverse osmosis filter that is going to accompany this. So, directly out of here is going to feed into the inlet of our reverse osmosis. Once your water passes through the reverse osmosis membranes, you'll have two lines, which are going to be your concentrate or your rejected water, and your permeate, which is your filtered water. If you work in the industrial industry, or you feel like you have the need for a water filter, feel free to reach out to us, or visit our website at crystalquest.com.